RAM Mounts

The RAP-B-366U universal camera and camcorder base consists of a B size 1" rubber ball, connected to a round plate with a 1/4"-20 camera thread. The round plate provides extra support and stability for the camera it's attached to. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on digital cameras, camcorders, and other devices.

The RAM-B-238U ball base consists of a 1" B size rubber ball connected to a 2.43" x 1.31" diamond plate. The diamond plate features two holes that measure 1.912" from center to center, matching the industry-standard AMPS hole pattern. This diamond ball base is compatible with a wide variety of RAM® device holders and cradles.

For anyone who needs more versatility from their GoPro® mounting solution, look no further than the RAM® ball adapter for GoPro® mounting bases. Utilizing the RAM® ball and socket mounting system, simply attach the included B size 1” rubber ball adapter to the GoPro® base for enhanced adjustability and superior vibration damping – letting you get the most out of your favorite action camera.

The RAM-B-202U consists of a 1" size rubber ball connected to a 2.5" (6,35 cm) diameter round plate. This mounting component includes pre-drilled holes using the universal AMPS hole pattern.

The RAM-B-230U consists of two attached B size 1" rubber balls that allow the connection of two 1“ size double socket arms. When measured from ball center to ball center, the length is 1.75" (4.45 cm).

For M8 handlebar bolts, the RAM-B-367U motorcycle handlebar base will replace the existing bolt with a 1" B size ball. This rubber ball base provides shock and vibration damping, and is compatible with a wide variety of B size RAM® double socket arms and device holders. The RAM-B-367U motorcycle handlebar base will work with any motorcycle that features an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size.

The RAM-B-309-7U combination handlebar and brake/clutch reservoir base provides the ultimate flexibility for mounting to your motorcycle. Attach the base to either your handlebar or brake/clutch, and achieve near-infinite adjustability and ideal viewing angles for your phone, GPS unit, or action camera. The zinc-coated metal U-bolt accommodates rails ranging from 0.5" to 1.25" in diameter. Hardware included.

The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the B size 1" rubber ball offset. Made of die cast aluminum with an overmolded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate that mounts above the cover using the screw holes and longer screws of the cover. The kit includes three sets of screws of differing lengths. The center two slots are 2 7/16" center to center and are just under a .5" long.

The RAP-B-378U consists of a 2.5" composite B size ball base, double-sided adhesive PSA stick pad, and sealed alcohol prep pad. This base will attach to all RAM® B size double socket arms, allowing you to connect a compatible device holder.

The RAM® motorcycle fork stem base is one of the cleanest and most popular solutions for mounting your favorite device on the center of your bike. Featuring a B size 1" rubber ball, this part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure 12mm to 38mm (.5” to 1.49”) in diameter.