Denali

The ground-breaking Harley-Davidson CANbus controller provides plug & play connection and intelligent control of aftermarket and genuine Harley-Davidson accessories right from your bike's original switches or DENALI Accessory Manager Software. Simply connect the CANsmart™ Controller to your Harley-Davidson diagnostic port to access over 35 programmable accessory settings that provide intelligent control of factory passing lamps, auxiliary lights, horns, brake lights, or any other accessory you can imagine. The four accessory circuits are electronically fused and can provide up to 25 peak amps (10 amps continuous).

The CANsmart™ H-D Controller is compatible with over 60 Harley-Davidson models, including Road Glide, Street Glide, Sportster, Dyna, Softail, Touring, CVO, and Trike models and more from the specified fitment list below. It plugs directly into the Harley-Davidson diagnostic port to enable plug-and-play accessory control.

If you are using an existing aftermarket accessory such as a fuel management system that also connects to the diagnostic port, a CANsmart™ Pass-Through Cable  (see in Related Products) is available for installation convenience.

The CANsmart's four circuits are preprogrammed to connect and independently control two sets of DENALI 2.0 lights, a SoundBomb horn, and our B6 auxiliary brake light. 

Gen II - More Features, More Power, More Versatile

Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power and each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights for added conspicuity, and set your left and right side lights to independently cancel when you activate your corresponding turn signal.  

Our new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing 36-watt street-legal driving light to hit the market. Our D3 driving light features our signature TriOptic™ beam system that includes a spot and hybrid driving lens with each light pod. Unlike previous TriOptic™ lights, the D3 hybrid driving beam is ECE and SAE compliant to deliver an impressive street-legal high beam in North America and European Union countries. But what if you're not concerned with street-legal precision and just want off-road outrageous? We got you covered too! The D3 spot lens was engineered for maximum beam distance measuring over 1900 feet at 1 lux (per pair). No other 36-watt light even comes close. The spot beam is so impressive it actually outperforms top-tier competitors' lights that are twice its size.

Choose to add an additional set of amber or selective yellow lenses to achieve greater performance in adverse weather conditions or to make your vehicle significantly more visible to other motorists on the road, (sold separately, see Related Products)!   

Note: In order to use these lights, an additional wiring and control kit is required, you can choose from three options (see the options in  Detailed Description and view in Related Products).

Note: Each light kit includes a low-profile mounting bracket with an M8 bolt, if you do not already have a suitable mount installed, you can choose an additional one (see in Related Products).

Our new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing street-legal fog light to hit the market. Our proprietary fog optics were painstakingly engineered to reach the maximum allowable candela (beam distance) for each of the regulated lighting zones for both the North American SAE/DOT and European Union ECE regulations! The result is a truly unique lens that performs as well as it looks, capable of generating a super-crisp fog beam that is 450 feet long by 300 feet wide at 1 lux (per pair)! No other street-legal fog light even comes close!

Choose to add an additional set of amber or selective yellow lenses to achieve greater performance in adverse weather conditions or to make your vehicle significantly more visible to other motorists on the road, (sold separately, see Related Products)!   

Note: In order to use these lights, an additional wiring and control kit is required, you can choose from three options (see the options in  Detailed Description and view in Related Products).

Note: Each light kit includes a low-profile mounting bracket with an M8 bolt, if you do not already have a suitable mount installed, you can choose an additional one (see in Related Products).

Simply put; the DENALI D4 is a beast. It is DENALI’s most powerful light packing the punch of 4380 lumens in an aggressively styled housing. The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. The included spot lens throws a massive beam of light and carries an official E-Mark certification.

Choose to add an additional set of amber or selective yellow lenses to achieve greater performance in adverse weather conditions or to make your vehicle significantly more visible to other motorists on the road, (sold separately, see Related Products)!   

Note: In order to use these lights, an additional wiring and control kit is required, you can choose from three options (see the options in  Detailed Description and view in Related Products).

Note: Each light kit includes a low-profile mounting bracket with an M8 bolt, if you do not already have a suitable mount installed, you can choose an additional one (see in Related Products).

At over 7,500 lumens, the DENALI D7 light pod is one of the brightest LED lights under 4.5 inches period. The light pod features seven high-intensity 10 watt LEDs that are focused through a proprietary single piece optic that was specifically engineered to create a full bodied spot beam that can reach over 1200 feet at one lux. The robust heatsink and Active Thermal Management™ work together to keep this high-powered lamp cool enough to maintain maximum light output when you need it most. Still not convinced this light is bright enough? A D7 pod will outshine seven D2 lights and produces more than twice the light output of our beastly D4 light pod.

Choose to add an additional set of amber or selective yellow lenses to achieve greater performance in adverse weather conditions or to make your vehicle significantly more visible to other motorists on the road, (sold separately, see Related Products)!   

Note: In order to use these lights, an additional wiring and control kit is required, you can choose from three options (see the options in  Detailed Description and view in Related Products).

Note: Each light kit includes a low-profile mounting bracket with an M8 bolt, if you do not already have a suitable mount installed, you can choose an additional one (see in Related Products).

After 2 years in the making, we are thrilled to introduce the highest performing, and most feature-rich 4-inch driving light ever released! Have you ever wondered what 23,000 lumens does to a dark landscape? It will blow your mind, and we haven't even started yet. Picture the most powerful driving light ever built, then add a flood beam, spot beam, and hybrid beam, a multi-color DRL mode, two fully dimmable circuits, and the option to change the beam shape and beam color on the fly. That's the D7 PRO, and it looks even better than it sounds.

Add to that, our patent pending X-Lens system which allows you to change the center flood or DRL beam color to white, amber, or selective yellow on-the-fly giving riders more flexibility and functionality than ever before. 

Last but not least, the D7 PRO has a "DRL Boost Mode" which allows you to run the center optics as a dim DRL or dial it up to 100% up to create a high-power flood beam. The innovative center optics can also flash in sync with your turn signals when paired with the amber X-Lenses.

Note: An additional wiring and control kit is required to use these headlights, DialDim Lighting Controller - The top dog in LED lighting control allows you to independently turn on/off and dim two sets of lights from a single halo dimmer switch and unlocks heaps of bonus features like high/low sync, strobe with horn, flash with signal, cancel with signal, electronic fuse setting and even doubles as a battery voltage monitor, (sold separately, see Related Products)!   

Note: Each light kit includes a low-profile mounting bracket with an M8 bolt, if you do not already have a suitable mount installed, you can choose an additional one (see in Related Products).

This DENALI DataDim™ Dual-Intensity Controller enables the DENALI Driving Lights to switch between half and full intensity with your vehicle’s original high beam switch. Simply plug this controller into the end of the harness included with our light kits to enable dual intensity functionality.

All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source

Our ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of 3-Wire auxiliary lights from a single consolidated wiring harness. The LED halo switch displays your exact settings and allows for effortless dimming on the fly. The blue halo controls light set one and the green halo controls light set two; simply double click to switch between the two circuits.

The controller also features high beam, turn signal, and horn inputs to unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.

More Features, More Feedback!

Our patent-pending multicolor halo dimmer switch can do a whole lot more than just turn your lights on and off and dim them. For starters, it displays the exact intensity of both of your lights so you're never stuck guessing if your lights are on, or what intensity they're set to.

Thanks to the electronically fused circuits, the halo switch can also display, and allow you to select, the fuse values for each circuit. And if a fuse trips, the LED halo will turn red providing real-time feedback and allow for resetting the fuse.

Last but not least, the switch halo doubles as a battery monitor with a low-voltage cutoff feature. Our industry-first design will flash different colors on startup to display your battery health and automatically shut off your auxiliary lights if the battery voltage drops below 10.8 volts.

The controller housing and switch both feature a fully waterproof design with gaskets and o-rings at every joint to ensure hassle-free operation in outdoor environments.

This 66" Light Extension Cable allows you to increase the length between DENALI driving light pods and DENALI wiring harness and controllers. This specific light extension is included in our Universal DialDim Kit but is also compatible with all other driving light harnesses and CANsmart Controllers. 

This Lens Kit for the D3 fog lights is designed to maximize visibility in foggy and rainy conditions. Both Amber and Selective Yellow lens colors increase visibility in fog and rain by blocking blue frequencies from the light, which reflect off water vapor and decrease vision.

Choose amber to match your OEM turn signals or Selective Yellow for even more daytime visibility to oncoming traffic.

The kit includes two fog lenses in your choice of amber or selective yellow.